Published
2024-03-17
Section
Articles
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
RESEARCH AND ANALYSIS OF FLUXES FOR SURFACING TRAVELING WHEELS OF OVERHEAD CRANES
PhD. Xashimov Xalimjon Xamidjanovich
Andijan Machine Building Institute Dotsent of the Department of Technological Machinery and Equipment
Bahromjon Ayubov Rustam ogli
Namangan Engineering and Construction Institute Master of the 2nd Year of the Specialty of “Technological Machines and Equipment”
Keywords: ceramic fluxes, surfacing, welding, melt, Scat.
Abstract
The article deals with the issue of surfacing under the ceramic flux of the wheels of overhead cranes. Worn parts cause the machines to work with a deviation from the specified parameters, reduce the efficiency of the machines, lead to the emergence of additional load units of the machines, due to which it leads to a deterioration in the working conditions and weakening of the mechanisms of the machines. To prevent these shortcomings of worn parts, submerged arc surfacing is used in place of replacement with new ones, which is economically beneficial.References
Qosimov, K., Xoshimov, X., Yо‘ldashev, S., & Ashurboyev, J. (2019). RESEARCH OF THE CHEMICAL COMPOSITION OF THE WORKING SURFACE OF THE GIN GRATE WHICH IS RESTORED BY WELDING. Textile Journal of Uzbekistan, 8(1), 26-31.
Хошимов, Х. Х., & Юлдашев, Ш. Х. (2019). Восстановление изношенных колосников при производстве хлопка в хлопчатобумажной промышленности (Doctoral dissertation, Белорусско-Российский университет).
Косимов, К. З., Муйдинов, А. Ш., & Хошимов, Х. Х. (2017). Перспективы восстановления изношенных деталей машин наплавкой композиционных порошковых материалов. Вестник Башкирского государственного аграрного университета, (3), 54-59.
Хошимов, Х. Х., & Абдуллаев, Ш. А. (2023). ПРЕДОТВРАЩЕНИЕ ПОЯВЛЕНИЯ ПОРИ В СВАРНОМ ШВЕ. Новости образования: исследование в XXI веке, 1(6), 699-708.
Хошимов, Х. Х. (2023). Раскисление сварных швов. Новости образования: исследование в XXI веке, 1(6), 709-718.
Xashimov, X. Х. (2023). Respublikamizda qo‘llanilayotgan ekskavatorlarning cho‘mich tishlarini abraziv yeyilishga qarshi ishlashini asoslash. Educational Research in Universal Sciences, 2(1 SPECIAL), 386-391.
Xamidjanovich, X. X. (2022). Improvement of the working chamber of the saw gin. ACADEMICIA: An International Multidisciplinary Research Journal, 12(4), 297-299.
Xamidjanovich, X. X., QoChqarboyevich, I. M., Azimovich, A. S., & OGLi, X. F. B. (2021). Restoration Erosion Working Surface Of Gin Rib By Welding Process. The American Journal of Engineering and Technology, 3(06), 153-159.
Хошимов, Х. Х., & Абдуллаев, Ш. А. (2023). Эритиб қоплаш усулининг оптимал режимларини тахлили. Новости образования: исследование в XXI веке, 1(6), 774-785.
Xoshimov, X., Yuldashev, S., Muydinov, A., & Kosimov, K. (2024, March). Analysis and results of the conducted research work to increase the resource of the ginning rib. In AIP Conference Proceedings (Vol. 3045, No. 1). AIP Publishing.
Daminjon o’g’li, O. E., & Xamidjonovich, X. X. (2023). VERTIKAL SILINDRIK REZERVUARLARNI TURLI QISMLARINI PAYVANDLAB TAYYORLASH TEXNOLOGIK JARAYONINI ISHLAB CHIQISH. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 18(6), 133-135.
Xamidjanovich, X. X. (2023). PAYVANDLAB QOPLANGAN YUZALARGA TERMIK ISHLOV BERISHNING OZIGA XOS XUSUSIYATLARI VA TOBLASHNING METAL STRUKTURASI VA QATTIQLIGIGA TA’SIRI. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 16(2), 62-64.
Xamidovich, X. X., Avazjon ogli, X. X., & Qutbiddin o‘g‘li, Z. D. (2023). KERAMIK FLYSLARNI ISHLAB CHIQARISH TEXNOLOGIYASINI LOYIHALASH. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 16(2), 79-81.
Xamidjanovich, X. X. (2023). PAYVAND BALKALARNI TO’XTOVSIZ ISHLAB CHIQARISH TEXNOLOGIYASINI LOYIHALASH. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 16(1), 77-80.
ugli, R. J. S. (2024). By Welding Increase in Working Resource of Gin Colosniks that Working Surface is Woren. American Journal of Engineering , Mechanics and Architecture (2993-2637), 2(3), 24–28. Retrieved from https://grnjournal.us/index.php/AJEMA/article/view/3607
RUZIBOYEV, J., & XASHIMOV, X. (2023). Chigitli paxtani jinlash jarayonining bugungi kundagi ahamiyati. ANDIJON MASHINASOZLIK INSTITUTI.
Алижонова, Х. А. (2023). ПАЙВАНДЛАБ ҚОПЛАНГАН ЭКСКАВАТОР ЧЎМИЧ ТИШЛАРИНИ ИҚТИСОДИЙ БАҲОЛАШ. O'ZBEKISTONDA FANLARARO INNOVATSIYALAR VA ILMIY TADQIQOTLAR JURNALI, 2(15), 401-410.
